RALEIGH -The N.C. Department of Transportation will hold a public meeting on Monday, March 25, on the proposed design for widening Cameron Road in Hope Mills. The meeting will be held at the Hope Mills Community Center, located at 5770 Rockfish Road.
In an effort to improve congestion and safety, NCDOT proposes to widen Cameron Road from Legion Road to Main Street (N.C. 59) to four lanes with a median. There will be turn lanes built at various locations. In addition, the department proposes the following:
- Eliminate left turns from Honeycutt Road to south Main Street.Eliminate left turns from Main Street to Honeycutt Road;
- Eliminate left turns from Stone Street to Cameron Road. Eliminate left turns from Cameron Road to Stone Street;
- Build a roundabout at the intersection of Cameron and Legion roads;
- Build a left turn lane into the school on School Street with a right in and right out access only exiting the school; and
- Build a northbound left turn lane onto Professional Drive that will be accessed by traveling through the proposed roundabout. There will be a right in and right out access only out of Professional Drive.
NCDOT representatives will be available from 4:30 p.m. to 7 p.m. to answer questions. There will not be a formal presentation, and citizens may attend at any time during the above mentioned hours. The opportunity to submit written comments or questions will be provided.
For more information, contact Charles Cox, of the NCDOT Project Development and Environmental Analysis Unit, at (919) 707-6016 or firstname.lastname@example.org, or Kimberly Hinton at (919) 707-6072 or email@example.com.
NCDOT will provide auxiliary aids and services under the Americans with Disabilities Act for disabled persons who want to participate in this meeting. Anyone requiring special services should contact Hinton as early as possible so that arrangements can be made.
Persons who speak Spanish and do not speak English, or have a limited ability to read, speak or understand English, may receive interpretive services upon request prior to the meeting by calling 1-800-481-6494.